7 Secret Tricks How To Kill A Tree Without Cutting It Down

How To Kill A Tree Without Cutting It Down? (2021)

Many people wonder how to kill a tree without cutting it down. If you are one of those people, you have come to the right place. There has now been a lot of extensive research into tree-killing. This article contains the best tips for those who are faced with such a problem.

It is almost impossible to do without trees in a summer cottage, as they give shade and coolness, bear fruit. If for any reason, it becomes necessary to get rid of the plant and free up space on the site, then it is important to figure out how to destroy the tree without cutting it down. In this case, you do need to pay for service to cut trees down and you don’t need to find out information about tree removal quote.

Old, damaged wood can be dangerous for the occupants of the house. The root system can damage the foundation of the tree that grows directly near the structure.

7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

Using chemicals, it will be possible to do without power tools and carefully remove the stump. This method is safe for others since the wood will not damage the house or plants, which is possible with the mechanical removal of the tree.

The use of chemicals will help to eliminate the emergency tree quickly. Before removing unnecessary trees, you should familiarize yourself with such unique methods as:

  • drug injections into the trunk area;
  • watering the soil with chemicals;
  • spraying leaves;
  • distribution of the drug on the bark of a tree;
  • complete elimination of the tree along with the stump.
The most effective way is to pre-cut the tree trunk and then treat the stump with chemicals. When choosing chemicals, it is important first to study the composition of the product.

Videos: How to Kill a Tree Without Cutting It Down

In this video, you can see 7 ways to kill a tree without anyone knowing. Before you will do so you wonder why you want to do it.

 

How To Kill A Tree Without Anyone Knowing?

When you ask yourself the question “how can I kill a tree?”, then remember that in no case should you kill a neighbor’s trees. You may have serious problems with the law since the neighbor’s trees are private property. It is much better to try to talk to your neighbor and come up with a definite plan for removing the tree.

If you are in dire need of cutting down a tree, offer to pay half or all of the cost for the process. But, of course, different situations can happen. For example, you want to cut down your own tree so that your children or neighbors do not know about it. Thus, there are many ways to kill a tree undetected.

Usually, you chop down the tree and grind the outer layer or cambium layer of the tree with Thordon to kill it, but drilling a few holes in the roots through the mud will work as well.

7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

It is much more difficult to locate holes in wood if you drill into the roots underground. If holes are drilled above the ground, they can be found much faster.

How to Secretly Kill a Tree

This process is carried out thanks to the tree killer named Gordon Stump Killer. A lot of reviews have been made on it, and here is a comment from one of them: “Place this on a poplar tree stump, and it will kill all other living poplars in a 50-foot radius that were over 50 years old. I felt sick and cried”.

According to this strategy, you can kill a nearby tree or bush with Gordon’s Stump Killer. In addition, all other trees around will also die. Unfortunately, this theory requires a proof, and there is still no guarantee that it will definitely work. If this is true, then Gordon’s Stump Killer may be the solution to your problem.

Tree Killer is a beneficial way of solving this problem. Superfuel works surprisingly well. Just don’t forget to buy the Killzall brand. He has the highest concentration.

Apply your chosen tree killer by pouring a little into the roots in the drilled holes. Place flag poles in the ground or cover the surface with mulch. After a couple of days or a couple of weeks, the tree should die completely.

Slowly Poison A Tree Undetected

A good tree killer poison is salt in large quantities.

READ ALSO ➡  Who is Responsible For Cutting Overhanging Tree Branches? (2021)

Large doses of salt are toxic to plants, and the main idea is to put Epsom salts in the hole next to the tree. Epsom salt is very inexpensive, so buying a lot of it won’t be a problem. Difficulties lie in the process of digging a hole. It is difficult to leave it undetected, especially if it is covered in grass.

7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

In addition, the roots of a tree can get in the way of a person, so digging a hole will not be easy. This method is not the most common, but it can also work and cause the tree to die.

Another way to slowly kill a tree without anyone knowing is to use copper nails. This idea has mixed opinions, but it really works. The death of the tree will occur very slowly, for example, within a year. Copper, as a substance, poisons the tree and contributes to its death, so it is possible to hammer the tree with copper nails.

If you want to leave this process undetected, follow these steps:

  • drive nails into the roots;
  • remove a piece of bark;
  • hammer in the nails and glue the bark back to the tree;
  • as an alternative – build a fortress on a tree or nail a sign to the tree using copper instead of steel.

Thus, salt and copper are the tree poison chemical and can kill it.
Of course, this idea is also working, but it is still better to drill holes in the roots and push Gordon into them. This way, you can kill your tree undetected.

Best Ideas for Secretly Poisoning A Tree From Youtube Comment

The comments on YouTube contain many interesting ideas and tips on how to kill a tree so that no one knows. Read them and choose the one that works best for you.

For example, many are advised to hang a sign with the image of the President of the United States on a tree. This step is not directed against a particular president, but there are those who do not respect him and, therefore, could kill the tree with the image of the President.

In addition, you can cut the half that is in your yard.

A good way to kill a tree is to prepare a special mixture. To do this, leave the husks from the black walnuts in the 55-gallon barrel and add water after a week. You should end up with an unpleasant mixture that needs to be watered for a couple of weeks. During this time, the tree should die.

7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

Above we have already considered methods of drilling wood, but they can be improved. For example, make a half-inch hole as close to the center as possible (or multiple holes near the base of the tree), insert copper tubing into them, and cover the holes with soft silt.

An interesting comment was left by a user who hammered copper pennies into a tree in the late 50s – 60s. Thus, the death of the tree cost him about 10 cents.

Next time, if you manage to find coins over 60 years old, be sure to save them! Perhaps someday you need to kill a tree without anyone knowing, and they will help you with this process.

Users also suggest many chemical methods:

  • Vinegar. It is believed that he is able to revive dull leaves, but this is not the case. Apple cider vinegar kills them.
  • Hydrochloric acid is considered by many to be the best way to kill a tree. Water a liter of solution every night to the base of the tree.
    You should be very careful. Most importantly, do not stand on the windy side, as the vinegar will smoke, burn your eyes, and harm your lungs. All week, when you water the tree, the leaves will slowly begin to fall off. If this does not happen, use the solution for another one or two weeks. When all the leaves fall off, this is a sign that the tree has died and will no longer be restored.
    Acid is inexpensive and can be purchased in 1-gallon jugs at Home Depot or Lowes. Go to the pool accessories section and buy a product with a concentration of 31-1 / 2%. It costs about $ 8 at Lowes today, or buy a 2-gallon engine for about $ 11.
  • Copper nails. Drive them into a tree at night so no one can see you. Try to muffle any sounds and make sure all nails are completely driven in, if possible. Otherwise, they will be easy to spot. The method is proven and used by different generations for many years.
  • You can melt the salt in boiling water and pour the resulting mixture into the prepared holes near the root system of the tree. Or you can use a shovel to remove the roots from the grass. Pour water into the ground so that it is below the level of the grassroots.
READ ALSO ➡  Tree Cutting Techniques - Detailed Manual (2021)

Water the tree with very low pH water. High acidity will kill it. Fold a mound of fertile soil about 2 feet deep around the trunk and plant a garden in this soil that is watered regularly. The wet soil opposite the trunk will bring in insects that destroy the bark, eat it, and kill the tree.

The whole process takes several years, so you can also enjoy the beautiful garden. Think over the layout of your garden and know exactly what you want (sunny or shady garden). Otherwise, you can get the opposite effect.

7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

Many people think that driving copper nails into a tree is too obvious, and there are other ways how to destroy a tree without cutting it so that there are signs of natural death.

Chemistry will be a good helper. For example, make a copper sulfate solution that is still in an aqueous form, that is, sulfuric acid. All that is required of you is to figure out how to pour the solution to the roots.

Regardless of where the tree is (in your yard or outside), dig up a piece of turf from your lawn and fold it over. Then start digging at least a foot down to form a trench and then dump the contents into the trench. Pour in a lot to provide enough spillage, and the wood will absorb it; it may take a year or two, but the chemistry is there in nature from the beginning.

When buying chemicals, it is important to consider not only the composition of the preparation but also the characteristics of the soil. Some products can negatively affect the condition of other living plants; therefore, having previously read the instructions, it will be possible to avoid harm.

Means for destroying the roots of trees will help to cope with the task more effectively if you thoroughly water the plant before applying the chemical because, in this case, the roots will absorb the drug faster. After that, the plant is watered with herbicide around the trunk. If you add dye to the solution, it will be easier to figure out which wood is processed and which is not.

Before chemically drying the tree, it is important to pre-install concrete barriers around the plant. In this case, the root system of many growing plants will not be affected.

If you want faster results, simply pour all the herbicide or any other herbicide under the surface of the lawn. At the end of the work, fill the hole or trench with a clean embankment and sod in the area. You may need a sprinkler for the grass to survive. However, the roots of the grass don’t go deeper than a few inches, so you need to dig deep first.

7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

Perhaps you want to kill a tree that is undercover. Copper spikes and electricity will help you with this. Use acidic pine fertilizer. Plus, water it daily. At night, under cover of darkness, hit the tree with an ax to girdle him. Or drill a hole halfway through the tree and plant an M-80 in it. Place the “die commie dork” pencil sign, light the fuse and run to your house. Many people might think that your tree was attacked by your neighbor’s children.

You can also blow up a tree on July 4th and cite the Independence Day fireworks. Or you can just call Harvey Updike, and he will do all the work for you.

Although you may not even get involved in this process and let the kids dig a hole while they play, when it gets dark, fill the hole with Epsom salts and cover it with the ground.

The black powder works in the hole, but people will surely find out that the younger tree has a trimmer, and the old ones have too thick bark, just use a hand saw to cut the bark all over the inside of the tree, it will die.
Many comments may seem funny, but they helped those people who figured out how to kill a tree without anyone knowing.

How To Kill A Tree Without Cutting It Down?

As has already been said, however, there is a problem about how to kill a tree without cutting it down.

Drill Holes In Roots And Apply Tree Killer

The best way to kill a tree without chopping it down is to drill holes in the roots and use a tree killer, girdle the tree, or drive copper nails into the roots. Warning: It is against the law to damage other people’s property. You have to use a tree killer that really works. Remember Roundup cannot kill a tree.

There are several ways how you can drill holes in trees. Just step back a couple of inches from the trunk of the tree and drill through the roots.

READ ALSO ➡  Beaver Cutting Down Tree - All Details
7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

You can usually tell where the main roots are from the trunk. Drill holes in the trunk, but it is better to drill holes in the roots because they are harder to find.

If you think you will look odd by drilling holes in the roots next to a tree, here are a few things you can try:

  • You could be patriotic and drill a hole in the ground and roots for reinforcement to hold the flag on the PVC pipe sticking out of the ground. Scouts often do this for fundraisers.

You can also raise the flag on the day of your favorite sports team. It looks like you are just decorating the yard. Another way to kill a tree unnoticed is to remove dirt and grass and put it in the mulch. After you’ve buried the ground, you can quickly drill a couple of holes in some of the roots.

This is the most important part. Use a tree killer that will actually kill the tree. Roundup will not kill every tree. Some of the more resilient trees you will need to use the truly powerful tree killer.

Girdle Tree

The Iroquois Indians used the girdling of trees. They carved a ring of bark from the tree around the perimeter. The wood was dying, and later they harvested dry wood to build their longhouses. The settlers adopted this from the Indians and still gird the trees for the preparation of firewood.

This method is suitable for you if you are interested, for example, in how to kill an oak tree. Tying the tree reduces the flow of nutrients from the roots to the trees, causing the tree to die.

Anything above where you girdled the tree will at least die. Some trees are more resilient than others, like the elm tree. There are times when everything that was above, a person girded, died, but everything that was below remained alive.

The problem with the wrapped tree is that it’s pretty easy to see what you’ve done. So you can gird a tree without the knowledge of people – it is to tie a goat around the tree. Goats love to eat leaves and bark. Soon they will eat the bark of the whole tree, girdling the tree and killing it.

Just look at all the forms on the Internet about people trying to stop their goats from killing their trees. This will work with a horse as well, but not all horses will.

Copper Nails

As mentioned above, many people find this method too commonplace, although, in practice, it works.
The only problem is that it takes over a year to kill a tree.

To kill a tree with copper nails, all you have to do is drive the bundle around the trunk into the living tree. If you want them to be harder to spot, root them in.

7 Secret Tricks How To Kill A Tree Without Cutting It Down
how to kill a tree without cutting it down

One way to do this in normal daylight without being noticed is to mulch the tree. Dig up the dirt from the tree in a large circle. Lay down a grasscloth and secure the cloth with copper nails. Just make sure you hammer in the root bunch.
Depending on the tree, within a year or so, your tree should die. Not sure how to kill pine trees? Drive copper nails into them; this will definitely help you!

It’s a little difficult to kill a tree without anyone knowing and cutting it down. However, these three ways are by far the best ways to do it, especially if you are trying to go unnoticed. Again, it is not recommended to kill someone else’s tree with these methods.

Only do this if you are the owner of the tree and do not want your neighbors hugging the tree to worry. Or discuss your actions with a neighbor and come to a common decision.

Knowing exactly what the tree can die from, it will be much easier to free the area from the plant.
Having figured out how to remove a tree without cutting it, it will be much easier to avoid dangerous manual work and sawing wood. Both chemicals and other available means will help to cope with the plant.

With this information, you must know exactly how to kill a tree without anyone knowing. If you have any other ideas you would like to add to this post, leave them in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *