Category: Tree Removal Professional

The process of cutting down a tree in sections isn’t as easy as it can seem to be. Only small trees can be liquidated without the help of specialists. The ways, describing how to do it on your own correctly, will be presented below in a separate paragraph.

What about large trees, in comparison with small ones, they bring much more nuisances to their owners.

Trees are the inalienable part of our planet’s flora, as they perform in the role of the lungs of the Earth. However, even trees can become redundant and dangerous to humans’ lives. There are some reasons that make people get rid of trees:

1. In case when the tree is diseased;
2. If the tree is seriously harmed, and subsequently, loses the ability to grow and to thrive;
3. The tree that makes too much shade;
4. The tree that is growing very close to the house, and thus, brings more problems than benefit

Ordinary people, who don’t know how to cut down large trees, can make it only worse. There is a high likelihood that in the process of removing a tree, they will get injured or inflict damage to their houses.

It is a professional who knows exactly, how to cut down a large tree, as he has dexterity in this deal, a great experience, and in addition, all necessary equipment that contributes to removing large trees without any risk for owners health and property safety.

When we speak about large trees, we should understand that in most cases the necessity of cutting down a tree in sections arises. It’s a perplexing and labor-consuming process that will be explained in detail a bit later.

In the following paragraph different kinds of tree defects, that make our ‘friends with leaves’ candidates to removal, will be defined.

In What Cases, a Tree Should Be Cut Down?

First of all, it’s necessary to determine the condition of a tree before cutting it, as it can turn out that your so-called ‘candidate to removal’ can continue living a long life without bringing problems.

It’s important to realize that not all tree defects are equal. If the deformities of your tree correspond to paragraphs, enumerated beneath, it means that you need to cut down your ‘friend with leaves’:

• 50% of the tree is damaged;
• Splits that spread over a quarter of the tree surface, including both the trunk and the branches;
• Trees that are tilted more than 15 degrees;
• There are roots lifted above the soil;
• The tree that isn’t damaged but is inherent in diseases, breaking and producing a lot of remains, messing the yard;
• Bad disposition, for instance, if the tree is growing on the precipitous surface, or infertile soil

Now, when you have already defined that your tree should be removed, it’s better to play it safe and to find out if you are allowed to cut down the tree.

Make Sure Whether It’s Legal To Cut Down The Tree In The Area Of Your Living

It’s believed that tree removal is a serious process that in some cases should be legalized by the council of the town. Thus, before cutting down the tree, inquire about order to figure out if you can liquidate the tree without any official permission.

If you find out that removing the tree is illegal because of some specific reasons, such as location in a sensitive environmental area, it will be necessary to appeal to the town council and to apply for special permission, giving the right to cut down the tree.

After checking out all the details and formalities, it’s high time to discover how to cut down small and large trees.

The Technology Of Removal Of Small Trees

What do we mean when we say a small tree? A tree can be defined as a small one if its diameter is less than 10 inches. You can deal without any complications with a tree of such size.

Anyway, nobody has canceled the safety rules yet. Even the removal of the small tree demands good and scrupulous preparation. It’s strongly recommended to wear a safety garment, that generally consists of:

1. Special gloves, made of tough material;
2. Rugged footwear;
3. A hard hat;
4. Protection for ears;
5. Safety goggles

Don’t forget to pay attention to the choice of a chainsaw. The length of its bar should correspond to the diameter of a tree. It’s recommended to have a tree felling wedge in case if the tree doesn’t fall so easily.

Besides, the best option is if you have another person, who can observe the process of cutting the tree, in order to prevent a working person if something is going wrong.

Before starting to work, you need to decide in what direction the tree should fall, and subsequently, to adjust your position towards the tree. Another significant detail is the number of cuts that will fell the tree. If your tree has a diameter of fewer than 7 inches, one cut is sufficient.

If the tree is much thicker, then you will need to make three cuts. Initially, try to cut the quarter of the trunk in the direction the tree is supposed to fall.

After that make the next cut, this time 2 inches above the first one, and at the same time angling it downward 45 degrees in the way you formed a gusset. The ultimate cut should be made on the backside of the gusset and 2 inches higher than the gusset bottom. You need to cut till it’s only 10 % left between the cut made on the backside and the gusset.

Then don’t distract from the falling tree. It’s important to control the moment of its falling, as the tree can go down in the direction that you don’t expect. In this case, you must react immediately and clear the area. If the tree, on the contrary, isn’t falling, use the tree felling wedge.

The Technology Of Removal Of Large Trees

The process of cutting down a large tree is notorious for its high level of danger. That is why people, having no experience, mustn’t do it by themselves. To avoid grievous consequences it’s better to appeal to a professional tree removal service that has special tree cutting techniques.

When the arborist comes, first of all, he evaluates the height of the tree with the aim to define whether there is enough space in the yard to fell the tree at once. There are only two options for further actions: if the tree is quite small, it can be knocked down at once; if the tree is too tall, then the arborist applies the method of cutting a tree in sections.

Felling The Tree At Once

The specialist determines the side the tree should fall on. In most cases, the chosen side coincides with the direction the tree initially leans. Moreover, the arborist usually verifies if any defects can subsequently become a reason for ruin. Then the felling process starts.

Two people take part in this operation, one attaches a rope to the tree, while another is responsible for guiding the fall of the tree. Two cuts are made, one on the side the tree is supposed to fall and the other one on its backside.

Helpful Video: Detail Instruction of Cutting Down A Tree In Sections

Is there is a tree you want to cut down? Watch How to Use & Maintain a Chainsaw. Instruction on how to cut a tree of different sizes and video: 5 ways to save money on tree removal.

Cutting Down A Three In Sections

Here is the algorithm of cutting a tree in sections that every specialist usually follows:

1. Cut the lower branches with the use of the chainsaw and remove them immediately from the work area so you could have a lot of space to continue your work.
2. Estimate the height of the tree to determine the best direction for its felling.
3. Lean a ladder against the tree in a proper position that will let you reach the necessary place.
4. To play it safe, use a harness system, tied around the tree trunk. This construction will help you to climb the tree without being afraid to fall. However, it’s better not to risk and not to climb the upper branches, as they can break unexpectedly.
5. Make a cut, composing seventy degrees and entering into 1/3 part of the trunk, on the side the tree will fall. After that make cut angling twenty degrees in the way that it coincides with the first cut at a right angle, forming a gusset. Make sure the gusset fell down. Then climb down from the tree.
6. Readjust the ladder to the reverse side of the place, where you have already cut. Take the fallen gusset and climb up. Then dispose of it. Cut straight into the tree till the chainsaw goes through the gusset cut. Thus, the upper part of the tree will fall in the direction of the gusset cut.
7. You should continue working in this way, moving lower and lower until there is only the last part left. This ultimate part can be cut without the use of the ladder.

When all the general work is over, it’s time to decide what to do with the remains of the tree. You can ask the invited team to turn the debris into something that will be useful in the future.

For example, the thickest parts of the tree might be used as firewood. The thin ones and branches as well, maybe chopped, and in the end, they may be turned into mulch. In case if you don’t need all these materials, it’s better not to toss them out, but to bring them to a special organic waste dump.

Even after such a long process, one thing is left. There is no tree in the yard anymore, except the little lower part, including roots, that still remains. It’s a tree stump that you can whether leave, whether remove.

If this stump is useless and only spoils the beauty of the yard, you can get rid of it with the use of a grinding machine by your own, or you have an option to ask the arborist to do it. If the stump is small enough, it’s also possible to scoop it out with a shovel.

To sum everything up, it’s necessary to emphasize one more time that the larger the tree is the greater risk its removal has. That is why you shouldn’t cut down large trees by yourself. Don’t hesitate to call specialists. They know better than whoever, how to do everything correctly.

Furthermore, they don’t forget to take into account all the defects the tree has, to exclude the possibility of making damage to the owner’s property.

Where to Cut Your Own Christmas Tree Around?

Nowadays cutting tree roots without killing trees is possible! Landscape trees give your garden plot a beautiful appearance and delight the owners. However, the roots of some trees become visible over time and come to the surface. This problem worries many homeowners, and they begin looking for ways how to control the situation and how to deal with exposed tree roots.

You should know that this is a natural process, and most of the roots are very close to the surface.

There are a few reasons why roots can breach the surface:

1. They are looking for moisture and oxygen;
2. Soil erosion due to rain and wind;
3. Competition between nearby trees and other vegetation;
4. Soil compaction for landscape changes;
5. Natural growth and aging of a tree;

The Ways Of Fixing Exposed Tree Roots

Tree life cannot do without a root system because it helps the tree get water and nutrients. But many people find the appearance of tree roots on the ground surface unattractive. Homeowners are wondering: how can they trim or remove the root system, manage its growth, without killing the tree?

Nowadays there are many ways that will help you to manage the root system and maintain tree health. A tree is a living organism, so you need to know about the right and wrong methods to care for its roots.

You can get help with:

1. Covering exposed tree roots;
2. Removing visible tree roots without killing your tree;
3. Solving problems with exposed tree roots;

 The first method is the best and most proven!

Covering the visible root system with compost or mulch will make the beautiful appearance of your garden and create a safe environment for root life. The most important thing is to make a safe zone at the base of the tree so that the lawnmower cannot trim there.

First, carefully remove the turf from under the tree. Mark the line between the future pavement and another part of the lawn. After that, you should cover the desired area with a layer of compost or mulch. This will protect the ground from soil erosion and hide the root system.

Make sure that you don’t accidentally put compost or mulch on the tree itself because this way the tree will rot. But do not overdo it! Too much mulch will not allow the tree to breathe and receive nutrients.

When you finally hide the root system, do not plant perennials on the resulting layer so as not to deprive the tree of nutrients and water.

There are a few more tips that will let you remove or trim the roots without harming the tree. Not everyone knows that there is such a thing as a drop-line of a tree. It means the border where the water needed to nourish the tree falls. If you remove the roots outside this border nothing bad will happen to the tree and its stability will remain.

However, if you still need to remove the roots inside this line, then we offer you a formula that will help you to determine how close you can remove the roots:

Trunk diameter x 10 = Minimum safe distance for root pruning.

In addition to covering the roots with mulch or compost, you can also raise the common ground layer. Order a couple of topsoil trucks and it’s best to do this in early spring. It may take several years for the grass to sprout again.

You can also cover the roots with dirt – this is the fastest and cheapest way! But again, you cannot pour too much dirt so that the tree can breathe. The layer of ground should not be more than 3 inches.

Of course, you can also use the second method and get rid of exposed tree roots!

But this way is not recommended. Trees need their root systems in order to receive the necessary nutrients and to function stably. First of all, it is very dangerous for the tree and can kill it.

Cutting exposed tree roots should be done only in cases where the roots have spread very far and threaten, for example, the foundation of your house or other vegetation.

Therefore, for aesthetic and other reasons, the best way is to cover visible roots. If there is no other way, cut the roots with a diameter of less than a few inches, leave the thickest roots so that the tree remains healthy.

Unfortunately, having committed such actions, you are not immune to the premature death of your tree (in this case you can use a service of the company for free tree removal).  There is a very big risk that you damage the leaves and branches of a tree if you cut off its roots. Aspire to save the tree roots in order to avoid the rotting or death of a tree.

If you are removing tree roots, use a sharp cutting tool (chainsaw, hedge clippers). Other tools injure the tree, leading to diseases and pests. In any case, if you decide to remove the roots of the tree, hire an experienced lumberjack. There are times when a tree can no longer be helped and you have to cut it down.

USEFUL VIDEO: How To Deal With Exposed Tree Roots

In this video, you can see a few reasons why roots can breach the surface. And you will find answers on how to avoid a problem?

Possible Problems Connected With The Visible Roots

Remember that there are several problems associated with visible tree roots. For example, some trees that have developed in a humid environment have roots located near the surface of the soil. This feature is possessed by maple, ash, willow.

Why can the visible roots become a problem:

• Children and adults may be injured if they do not notice the roots of the tree;
• Visible roots interfere with pruning and gardening. If you accidentally touch the roots, the tree may die. It can also damage your garden equipment;
• Disease, infection, and decay of a tree. This is harmful to the tree itself because the root system must be protected from damage;
• Damage to the road or sidewalk. There are many examples of when the roots lifted, bent, or broke the road.
• It is not aesthetically pleasing and spoils the exterior of your garden;
• Other vegetation may die or become rare;

If you have one of these problems and have no experience in self-root removal, you can contact the company Dragonetti Brothers. The company from New York City offers a wide range of services and will help you with cutting tree roots without killing trees. Your trees will be safe with Dragonetti Brothers!

Surface Root Prevention

Often you are able to avoid surface rooting. Follow these guidelines:

1.  Consider the soil type, moisture level, the amount of light for planting a tree. If it grows in conditions suitable for it, the roots will not become visible;
2. Water and fertilize trees so that the roots go deep underground;
3. Carefully choose the types of trees, find out their features. The roots of some trees are prone to surface growth;

For the proper treatment of the exposed tree roots, call a specialist, and find out possible options to preserve the health of the tree. Fortunately, cutting tree roots without killing the tree is accessible to everyone!

Tree services near my house? Now it’s a reality! Tree trimming services in Lake Havasu City will help you if you need to hang branches or, for example, to remove unnecessary vegetation. Now you can get answers to all questions from Tree services near Pros! The goal of the tree services is to help you to compare multiple Lake Havasu City tree companies. You no longer need to surf the websites yourself, and the tree services will do everything for you! Local tree services Pros offers the lowest tree removal quote and aspires to make your home beautiful again.

Tree removal Services Near Me

All the Arizona companies that Trees removed Pros previously analyzed have a license and insurance. There are 2 tree-cutting services in Lake Havasu City. If you wonder, «What service is the nearest to me? », the tree services will answer: «Santa Ana Palms Maintenance and Landscaping.» The closest location is 485 Highland Drive, Lake Havasu City AZ 86404. All tree-cutting companies of locations in Lake Havasu City offer the:

1. Favorable cutting trees and removal prices, including stump removal;
2. High-quality work;
3. Pruning and garter trees;
4. Tree stump uprooting;

Prices of location in Lake Havasu City tree species service depend on the complexity and duration of work. But the average price is approximately $500. The most expensive and hard work is cutting larger trees, clearing hard-to-reach areas, and such types of work which require special equipment. Right now, you can request a quote, and then the tree service will help you to estimate the amount for the work that you need.

By the way, trim Trees Pros offers not only limb, trimming and branch removal, but also tree removal in Lake Havasu City and its suburbs.

If you wonder, «Can the Tree cutting service near my home provide tree removal in Lake Havasu City on the same day I need?», you will receive an affirmative answer. Although everything depends on how much work the tree service has. Be careful and phone them as soon as possible to order the cutting trees services of an arborist. Trees can harm you and your property.

The tree service does its best for your comfort and convenience. Just fill out its request form or call one of the tree cutting companies in Lake Havasu City. At any time you can get a service, compare prices and choose a tree cutting services suitable for you.

In Lake Havasu City it’s not only possible to cut down or remove trees, but also to maintain their condition. You can call A-Z Yard Maintenance to ensure that your trees are healthy. It’s easy to take care of trees and palms with this tree cutting services.

The available services are:

• Tree trimming
• Tree planting
• Tree thinning
• Palm tree skinning
• Tree shaping

The professional team of A-Z Yard Maintenance with amazing job has gained the trust of hundreds of people. The workers have special equipment and useful knowledge, that’s why your small trees will look healthy. It’s even possible to treat tree for diseases. This tree cutting services also provides complete palm maintenance.

If you still ask a question, «How can I find tree cutters near me?», the ChopDoc tree cutting services will also help you with free estimates. First of all, the tree service that you are going to hire has to have liability insurance, workers’ compensation insurance, and special certifications. If the tree google search shows you these documents, then it can be considered honest and reliable. Another indicator is accreditation in the Better Business Bureau (BBB) and stump grinding rating for homeowners insurance.

However, a lot depends on you. You should find out if the tree service company is a member of the International Society of Arboriculture or the fallen Tree Care Industry and what reputation the company has. If these requirements are not met, the safety hazard provides low-quality services. Don’t think that a good company will ask you for too much or too little money. Anyway, ChopDoc will help you to find a professional.

Useful Information: TREE REMOVAL COST

In this video you will learn how much to charge for tree removal?

Tree removal company Cost

Service – Cheap – Expensive – Avg.

Tree removal $225 – $3,900 – $871

Tree trimming – $120 – $1,200 – $438

Branch removal – $59 – $750 – $129

Stump removal – $70 – $1,200 – $187

Arborist report – $300 – $550 – $450

Tree cutting service prices

Tree removal cost

The national average so far in 2021 for tree Removal permits is $847. This tree services cost for your yard for a single tree. Tree removal companies’ great prices for the job includes tree plants from 15 ft – 80 ft. Cost factors include tree size, type of tree, and the time of year. For a more accurate price, Consult your local tree service professional or the calculator tool below.

Tree trimming services cost

This tree trimming varies depending on the size of the fallen tree and the number of branches being stump removal. Small trees are going to costs less than larger tree. Does the branch stretched out over the roof of a house or is it over a shed or a fence? Tree trimming services generally start at $75 for a single palm trim, but the average costs for tree trimming cost is about $438.

Arborist report cost

This is one service where prices are generally fixed with an average price of $450.

Find the cheap in tree removal costs by:

1. Internet search “tree removal service + [your city/town]”
2. Skip page one results and go straight to page two
3. Eliminate the expensive ones by workload*
4. Try call during winter |(always cheaper)
5. Use these FREE services to get matched with the top-voted local tree service professionals.

Chapter FAQ

How much does it cost to cut out a tree?

On average, the tree removal costs start at around $ 450 the hourly rate. The tree removal costs amount includes cutting down the tree and cleaning and disposal of wood. Thus, you get a quick and safe cutting of the tree without wasting your own strength.

Is it cheaper to have a tree cut down or trimmed?

It will be cheaper to the tree trimming than to cut it down completely. Depending on the amount of work, the price tag for tree trimming can reach up to $ 250 in hourly rate, and tree removal services will costs around $ 450 in the hourly rate.

Who chops down trees?

Smaller trees are cut down by specialists who are called woodcutters or arborist. Usually, you can hire them through specialized companies or by finding their resumes on a website for searching for various services. Woodcutters are specially trained in their work for a long time so that they can then cut or cut trees efficiently and safely.

How do you cut down a large tree?

This method is used to tree removal job with a height of 3-6 m.

If they are higher, it is better to entrust their cutting job to professionals.

If the tree has a thick crown, then first you need to remove dead thin and medium branches from the ground, then, putting a ladder to the tree, cut down job higher branches.

When the trunk is cleared of all small and medium branche, you can start cutting job the thickest ones. This procedure will allow you to work in comfortable conditions because thin branches will not interfere with the cutting of the rest.

It is necessary to pruning job off thick branches so that there are convenient platforms with which it will be possible to move around the tree. Only after pruning iob all the branches, you can start sawing the trunk, from which tree trimming with a length of 100-150 cm.

It is undesirable to cut the trunk in longer pieces, because the longer they are, the harder it is to direct them in the right direction, standing on a ladder or on a branch of the trunk.

Conclusion

Tree removal or tree cutting services are very helpful in many situations. It is especially good if such services are found near you. Pay attention to reviews and recommendations before hiring workers. Look for the best options and then everything will be fine.

We hope that you were able to find all the answers to your questions.