How To Kill A Maple Tree -Professional Advice

How To Kill A Maple Tree -Professional Advice

The maple tree is a wonderful plant, but sometimes there are reasons why homeowners want to get rid of it. The question immediately arises in a logical way – “How to do it correctly?”

You are a lucky person because you are at the right time and in the right place! This article was created especially for you because now we will describe how to kill a maple tree.

How To Kill A Maple Tree

Some people are surprised when a homeowner wants to kill trees in his yard. Such a reaction is clear and understandable. But not everyone understands how sometimes it is not only just desirable but also necessary to kill trees because for some reason they can harm the homeowner and overshadow his stay on his home territory.

However, whatever the reason and motives, no matter what anyone thinks about killing trees, in this article we only tell you how to do it correctly. So let’s get started soon.

How do you kill a small maple tree

как убить клен
The Spruce / Adrienne Legault

There are several best methods you can use in order to kill a small tree.

You can use:

– Tordon method

– Herbicide method

– Roundup method

Basically, these are the main methods that are used to kill the tree. Another issue is that they differ in the ways they are used. Tordon or Herbicide can be used to kill trees in different ways. We will describe all this below in the article. But for the small unwanted maple tree it is usually Roundup used as it is the viable option.

Remember that the combination of knowledge of detailed and clear instructions together with compliance with safety rules and existing laws will give a completely successful result.

How to kill  a tree without cutting it down

How to Grow Maple Trees Feature

To kill the standing tree safely and effectively use these methods.

1) Try to measure about 30 centimeters from the lower base of the tree bark. Then take the Tordon pump sprayer and apply this killing spray on that lower part where is no bark.

2) To kill a tree with roots, you will need to cut the bark of your tree in such a way that the small “wounds” are in the circumference of the bark of the whole tree. After that, use a strong herbicide such as Roundup or Thordon to coat the tree with this deadly substance.

3) Get rid of the 10-20 cm wide ring of tree trunk bark around the tree. Use herbicide to coat it with this substance.

4) Make a few small holes (about 5-10 centimeters deep inside) around the entire trunk of the tree and apply herbicide inside these holes to kill the tree.

5) You can also use a leaf herbicide to kill a tree less than 4.5 meters tall. Just apply some substance (Roundup) to the leaves.

These five methods will help you kill a tree safely, effectively, and permanently.

Basal bark processing

All methods include only taking Thordon spray. It is designed in such a way that you just take it and spray it on some area.

Specifically, you will have to spray the substance on the first 30 centimeters from the lower base of the tree bark.

Note that you will only have to use Tordon, and Roundup is not at all suitable for this method because you are dealing with large trees.

Cut surface treatment

How to Grow Japanese Maples Feature

This method involves first loosening the natural “fence” that is the tree’s bark protection, and then impregnating the exposed wood with a mixture that kills the tree.

To do this:

1) To begin with, at the base of the tree for about 15-60 centimeters, make quite impressive and serious cuts. Use an ax to cut off the base at a slight angle.

2) Make periodically repeated cuts, similar to those you made earlier at the base, only now around the entire circle of the tree.

3) When you have finished cutting, also known as the surface cut method, and notice that the wood is already exposed, move on to using Tordon or Roundup.

4) Don’t put off applying. To successfully destroy the roots and prevent the growth of new shoots, it is necessary to cover the sections with the substance as soon as possible.

Well, we will explain what is the meaning of this procedure.

The bottom line is that you penetrate into the vulnerable part of the tree and saturate the wood with a spray that should soak into it and kill the whole tree.

Grow Japanese Maple Tree5

By the way, in this case, it makes no difference whether you use Roundup or Thordon, since both substances contain glyphosate, and this is the main thing, because glyphosate is a plant killer.

In the previous method, Roundup cannot be used for the reason that the substance would be too weak to kill your tree and reach the roots without breaking through its bark.

Instead, you’ll only get grass and other plants that are young and more vulnerable next to trees damaged by Roundup fumes. In our case, we attack the weak part of the tree and kill it easily.

By the way, when spraying Thordon to kill a tree, do not be surprised that the treated trees turn blue. This is done on purpose so that you can see which areas are being sprayed and which are not.

Barking

Ring barking is a very effective method of killing trees, which will allow you to kill the top of the plant and its lower part along with all the roots of the trees. You will definitely get rid of all new shoots.

To do this:

1) Get rid of the tree trunk bark ring. Just cut the wood to a depth of 10-20 centimeters inside in a circle around the entire tree.

2) Don’t delay and immediately apply herbicide (Thordon Spray or Roundup) to all bare and freshly cut surfaces.

This method will be useful if you want to not only stop growth, but also make sure that all the roots of the tree will not survive by applying the herbicide and you will end up with a completely dead trees.

Injection

как убить клен

This method is also quite easy to perform. You will need a drill and a roundup or thordon.

To do this:

1) Use your drill and then start drilling inside your tree (about 4 centimeters deep) following its circumference.

2) Leave a distance of approximately 5 centimeters when you drill holes.

3) Make holes that go down at an angle into the base of the tree (45 degrees).

4) Fill your holes with Tordon or Roundup

This method is most often used by those homeowners who do not want to cause too much mess and dirt in their yard, and who also want to be sure that the killing substance does not get on nearby trees or plants.

Foliar Spray

You can use the Foliar Herbicide as well in order to kill the tree less than 4,5 meters tall. Just apply some substance (Roundup or a selective weed killer) on all the tree leaves.

Advice! Choose the quiet day when you will be sure that the killing substance will not be transferred by the wind from one tree to nearby trees or desirable plants. The early summer and spring will be the ideal seasons for applying herbicide on the small tree leaves early summer.

How to kill and remove a small maple tree

Check this instruction if you want to know how to kill and remove a small maple tree.

Cutting the Tree and Branches

manufacturer's instructions, copper sulfate, epsom salt, easiest way

In this case, the first thing to take into account will be the selection of a suitable tool for tree removal. For the small trees, choose the small tools, for the large trees – the large tools. For example, to cut a tree, you will be able to take only the saw that is designed for trees.

Especially those with large tree are preferred because then the cutting process will be easier. The battery-powered reciprocating hand saw is suitable for medium-sized trees, and full-fledged chainsaws are suitable for large trees.

But another important factor will be safety, because if you do not provide everything properly, then you risk injuring yourself or your property. Be as careful as possible with large trees and cutting the main trunk, because if you cut it thoughtlessly, it can even fall on your house.

It is better to hire a tree removal specialist if you are not confident in your abilities so that you do not regret that you dropped a tree on a car or house while the tree removal process…

Removing The Stump

After you got rid of the tree itself, there was an annoying stump? Well, we understand! You know, in fact, we would not advise you to strain too much in removing stumps, because you can just cut it down to ground level and everything will be fine.

Removing a stump is not the easiest and fastest process, so think a few times before starting this business. The grass can grow over the stump if you want.

But if suddenly you still do not give up your desire to remove the stump from your garden, then here are some tips for you.

First, dig up the ground around the stump so that the saw fits there. Then start cutting the stump from the bottom with roots. Then bury the ground and plant grass in the garden. That’s it!

Note! A battery-powered reciprocating hand saw will be more suitable for this purpose.

To learn more about how to remove a tree stump, read my article How To Get Rid Of A Tree Stump With Charcoal.

How to kill and remove a large maple

large tree, bleach kill , local regulations, copper nails

Check this instruction if you want to know how to kill and remove a large maple tree.

Cutting the Tree

To begin with, study the prices of services offered by professional specialists dealing with the removal of large maple trees. If you want to do all this by yourself and think that it will cost you less, then let’s check together whether this is really the case.

– First of all, you will need at least minimal protective equipment.

– Secondly, you will have to get a saw for cutting the trees.

– Thirdly, you will pay all the penalties yourself if you suddenly damage something during the removal of trees, while a professional will cover everything with his insurance.

Well, if you still do not deviate from the goal and decide to do everything yourself, then here’s a tip for you.

Cutting large maple trees is the same as cutting small ones, but only in this case, you will have to cut the tree into small pieces starting from bottom branches to top branches or from small branches to big branches. Do not try to cut down all the big trees at once. It won’t end well large tree.

Removing and Disposing of the Stump (Stump grinder using)

Here are the best methods. You can burn the stump, grind it with special equipment (stump grinder) or hire a professional and just pay money for the service without worrying about these problems. Of course, the third option will work for sure than if you do it all yourself.

What is the Best Time of Year to Kill a Tree with Herbicide?

dead trees, large tree, early summer, natural resources

When you introduce a chemical herbicide, it means that you are aiming to send this herbicide down to the roots to completely kill the tree and prevent the growth of new sprouts. In autumn, the sap of the tree flows down, which means that all the herbicide solution falls exactly down to the roots with the sap. In the spring, the opposite situation occurs.

The chemical herbicide will not get to the maple trees roots, so choose autumn to apply herbicide to kill the entire tree.

Read also:   How to Correctly Pruning Nectarine Trees

Final words how to kill a maple tree

So, let’s sum up. After reading our article, you have learned all the methods of killing trees. We hope that our instructions have helped you to kill the tree to the last root.

View article sources:

Enlo, S.F. and K.A. Langeland. “Herbicides for the Control of Invasive Trees in Home Landscapes and Surrounding Natural Areas”. Publication No. SS-AGR-127 . University of Florida IFAS expansion, 2016
Stelzer, Hank. “Removing Unwanted Trees from Your Forest: Part I”.

Green Horizons vol. 10, no. 1, 2006.
Stelzer, Hank. “Removing Unwanted Trees from Your Forest: Part 2”. Green Horizons, vol. 10, no. 2, 2006.

Pruning Nectarine Trees

How to Correctly Pruning Nectarine Trees: A Simple Guide

Everyone is familiar with the fruit called nectarine. This is a really delicious fruit. But what about nectarine trees? Before you get ripe and delicious fruit, you need to grow a healthy tree that will bring a good harvest.

Then pruning will be the most important factor that will affect this. In this article, we will describe the correct method of pruning nectarine trees.

Read This Before Pruning Your Nectarine Tree

The main factor you should take into account is knowing what hardiness zone you live in. This can help you to know which time of the year is ideal for you to prune the nectarine tree.

Check the picture below.

Pruning Nectarine Trees

Find your hardiness zone HERE

Without this knowledge, you’ll not have more fruits or you will have a dead fruit tree.

How much should I prune nectarine tree?

Ideally, if you want to encourage vegetative growth of the tree and have a healthy growth of the tree in common, healthy and rich harvest perform pruning of the tree every year.

When to prune nectarine trees?

You can choose lat trimming trees in winter, early spring (after the ground has begun to thaw, but before your nectarine tree has buds growing on it), or late summer (after a harvest) to prune your nectarine tree.

10 Effective Tips For Pruning Nectarines

Yes, you already know that pruning the tree is an important process. But what about how to do it correctly? This process can be quite difficult if you do not have the relevant knowledge and at the same time, it will not be difficult for you to do a tree pruning if you are well aware of this issue.

So, catch 10 useful tips that can help you to perform pruning of the tree.

1. Don’t hesitate with nectarine tree pruning

Do not hesitate with pruning the tree, because when you just plant your tree and do the pruning of branches decides whether your tree will be strong and healthy and whether it will bring you good nectarines.

Try to think about the future shape of your tree more when pruning. You may be surprised but when doing this step you are pruning a lot of wood.

Plant growth, fruit growth, and fruit size are determined after this procedure is performed.

2. First you have planted the tree, prune this in winter

It will also be great if you perform pruning of the tree in the first winter after planting it. You will need to leave only those few fruiting wood branches that will really bear nectarine fruit.

3. Prune Every Year

Prune the tree every year during the dormant season, also leaving only those branches that really give the harvest. It helps to be sure that next year’s crop will be healthy and rich.

4. Do not be confused about branches

One of the most important tips is to make sure you prune any branches that are coming off of your Fruiting Wood that does not point outwards. If it points inwards, cut it. If it points out horizontally, cut it.

5. Prune Dead Wood

It is necessary to prune diseased branches, discolored, or dead wood (often without leaves and fruits), as well as areas without bark. Also, an early indication of the ill wood is key. Hardened sap on the wood is the first factor of the ill plant. Start pruning it immediately to prevent your whole plant from death.

6. Prune Suckers

Suckers are real evil for your tree, because they grow from the tree root system, while they do not bear fruit and take away nutrients and water. Get rid of them.

7. Prune Secondary Branches

How to Correctly Pruning Nectarine Trees

Cut off excess secondary branches (every branch that is growing at less than a 45-degree angle) that do not have harvest but only take valuable nutrients from more important main branches.

8. Prune Fruiting Wood

Sometimes it is necessary to prune the branches that give the harvest too if you want to get a rich harvest. Cut off 1/3 or 1/4 from the main branch.

9. Prune Non-Fruiting Wood

Non-fruiting wood is your real enemy. All new growth and new branches must be pruned as well if there is no harvest on them. To help a plant produce more fruit you should leave only those branches that will give the harvest.

Cut it off and don’t regret it!

10. Don’t Forget About Distance

There should be 10-15 inches between your fruit-bearing branches. There shouldn’t be pointing inwards branches or intertwined with each other branches.

Useful Video: How to Correctly Pruning Nectarine Trees

How to Correctly Pruning Nectarine Trees

Now we can share with you detailed instructions on how to prune nectarine trees correctly.

Pruning fruit trees should not be ignored by you. With this procedure, you help the nectarine tree to be strong, healthy, stress-resistant to cold. Also, this procedure is responsible for healthy growth, what the harvest will be, whether the fruits will be large, what their quality will be.

Pruning Nectarine Trees
How to Correctly Pruning Nectarine Trees

So, let’s go.

Tools you’ll need

Obviously, before you start to do the following actions we should say that first, you’ll need to prepare some necessary tools.

– Secateurs to prune small branches

– Pruning saw for larger branches

– Chainsaw for larger branches

– Sharpening tools

– Wire

– Chlorine bleach and water

– Lime sulfur

– Latex paint

– A ladder

Learn how to properly clean your pruners in the video below:

How to Clean and Sharpen Pruning Tools

Disinfect your tools

You may be surprised, but disinfection when pruning the nectarine tree is also an important procedure. It turns out that non-disinfected tools can cause the spread of pathogens and bacteria.

In order to properly disinfect your tools, you will need to create a special solution.

Imagine a liquid in a container.

Divide the entire volume of liquid into 10 parts.

One of these parts should consist of chlorine bleach, and the other nine should be water.

Disinfect your instruments with this solution for 30 minutes.

Then you can proceed to the next step.

Cut the trunk

Look at the top of your plant which is growing from the trunk. Visually imagine or measure how much will be 60-75 cm from the beginning of the top of the plant. Cut it off. It also has a beneficial effect on plant growth, fruit growth, the root system, vegetative growth, and nutrients/water circulation.

Trim the bigger branches

So, you have already correctly performed all the actions listed in the step described above, but what to do next?

And then you will have to pick up the pruner again. Use it and get rid of all small or large branches without regret except for the two main branches. These two branches are the tallest ones growing from the trunk of the tree. They are also called scaffold branches. You have to form a V-shape (also seems like Y-shape) with these scaffold branches.

This procedure helps the tree absorb more sunlight.

Secure the highest branches

Now take the wire. You should use the wire to create a Y-shape between the two highest scaffold branches and the trunk. It helps to keep them stable. At the same time, you need to make sure not to overdo it, otherwise, the overstretched wire will prevent the branch growth.

Do not think that after first pruning you do not need to prune your nectarine tree then. You have to prune young trees mandatory for the first three years after planting.

Now you have to look at your Y-shaped scaffold branches and find the trunk’s extension above. Cut it off and do not forget to hold your tool at a 45-degree. This procedure is necessary if you want to distribute nutrients to its lower parts and encourage vegetative growth.

Then you can wait until January. Then you have to cut back on new branch growth. These are lateral branches that grow out of the scaffold branches. Prune these branches growing from scaffold branches to the collar or base at 45 degrees.

Don’t let your tree get sick. You may ask how to determine this. Very easy. The first sign that your tree is starting to get sick is the gumming that appears. They are formed due to the leaking juice. And the juice appears from the damage. Injuries signal illness. Trim the places with gumming.

Cut down the smaller branches

We said above that getting rid of suckers is also an important step on the way to growing a healthy plant. Suckers prevent your nectarine tree from getting all the nutrients and water in full. These small branches grow from the base of the tree but do not have a harvest. You don’t need them, so cut suckers back to the branch collar.

Cut to the branch collar at a 45-degree angle as well.

Actually, you don’t need branches that grow downwards. These branches at first seem to bear fruit, but you will notice that time after time there will be less fruit and the branches will only eat nutrients and water once again, which in turn will not go to the fruit-bearing branches.

You should prune such branches at the point where they tend to grow downwards to encourage horizontal growth and fruit production.

Your plant does not need many small branches that do not have a harvest. In order to determine at the beginning where the fruit will grow and where only the leaves and branches are, pay attention to the buds.

If there are two or three buds in one place, then this indicates that fruits will soon appear in their place, and if you see only one, it will be a leaf or branch that is being born. If you find one bud, cut off the branch heading slightly higher from this bud.

Protect your nectarine tree

You know that despite all the good sides of pruning a tree, this procedure causes a lot of stress to the plant. To protect it from insects and disease, lubricate the trunk with latex paint.

Pruning Nectarine Trees

Final words

Fruit-strewn trees are the dream of every gardener. It is possible to realize it only under the condition of competent and full-fledged care of plantings. Competent pruning of trees is especially important, without which their normal growth and development are impossible. In this case, there is also no need to wait for a plentiful harvest.

Now you know all the details concerning this problem and are also familiar with the detailed instructions on how to prune your nectarine tree.

We hope we helped you. We wish you good harvests!

Trimming Trees in Winter

A Gardener’s Guide to Trimming Trees in Winter

I bet almost all of us are used to the idea of cutting trees in summer, everyone usually imagines a picture of a gardener or a housewife trimming shrubs, but have you heard about trimming trees in winter? You may amazed, but this way of cutting plants has lots of advantages compared to trimming in summer. Pruning trees in winter not only helps remove unsightly dead limbs but also promotes “strong new shoot growth” for better spring bloom, according to the Arbor Day Foundation.

Let’s dive into the topic and learn what pluses and minuses each method of trimming has.

What is the difference between trimming and pruning?

Before we start telling you about differences in the time of cutting trees and shrubs, it is necessary to explain the ways of cutting themselves.

These 2 terms – trimming and pruning – seem to have absolutely the same meanings. However, it is wrong: although the actions are similar, the purpose, the tools, and frequency of procedures are different.

Pruning

Trimming Trees in Winter

Pruning is the process of cutting branches and leaves in order to remove diseased and dead parts of a tree. The tools used for pruning include hand pole saws, shears, and lopping shears. The procedure of pruning is done quite rarely.

Trimming

Trimming Trees in Winter

Trimming is the process of cutting branches and leaves for improving the look of a tree. Trimming is done frequently because leaves and branches grow fast spoiling the general look of a tree all the time. The tools used for trimming include saws, hedge trimmers, and hedge shears.

Benefits Of Trimming Trees In Winter

A more distinguishable tree structure

When leaves fall off deciduous plants, it is much easier to find all the damaged or diseased branches. You don’t have any obstacles on your way to the wood, so you’re able to see all the trunks and branches freely and prune dead and diseased wood fast and easily.

In order for the branches for growing, you need to make the right cuts in the right places to improve the shape and health of your trees.

Dormant pruning doesn’t spread tree diseases

Trimming Trees

Tree diseases are spread by bacteria, parasites, fungi, and insects. Since these microorganisms are dormant in cold temperatures, winter tree work doesn’t allow the diseases to spread further from plant to plant.

There are kinds of trees which have to be cut in the cold time of the year exceptionally. For example, oak and elm can spread oak wilt and Dutch elm disease respectively.

More comfortable process of work

Cold temperatures in winter result in ground freezing. You can take advantage of this fact by bringing heavy equipment and putting it on the hardened ground. This way, you will feel more comfortable while working and accomplish it faster and more effectively than if you stand on an unreliable ladder being afraid of falling down all the time.

In case your region is characterized by warm weather in the winter months or it is late winter or early spring, be careful and check the solidity of the ground. It can happen that there’s a fragile layer of ice which can be ruined under the pressure of your heavy equipment.

Trees have less stress

Usually, when you prune trees damaged or diseased branches, a tree tries to recover and regrow cut branches quite fast filling the appeared gap. However, if you do winter pruning, new growth doesn’t begin until the growing season, i.e. until warmer spring temperatures come.

This fact is also explained by the fact trees need more sunlight, nutrients, and water for healthy growth. So, the effect of dormant pruning keeps for a much longer time than the effect of pruning in spring or summer.

A tree has more time to cure itself till destructive insects appear.

A safer territory for you and your household

Winter pruning may be needed not only for improving the look of trees and shrubs and removing dead and diseased wood. Winter pruning cuts may also be needed for removing dead or dangerous branches and trees which jeopardize all the people going around the yard.

If you have such dangerous branches, don’t delay pruning and warn everybody about the trees and fence the trees. Find out who is responsible for cutting overhanging tree branches.

Advantages and disadvantages of trimming trees during spring and summer

Trimming Trees

Trimming and pruning trees in spring or summer has some pluses and some minuses.

Here’s the list of tree work features which warmer weather brings.

Pluses

  • You can see the tree the whole image of trees including leaves. Though when you prune trees the fact that leaves fall off deciduous plants in autumn is great, when it comes to improving the general look of trees, you definitely need to see the whole tree.
  • Spring and summer change both trees and surrounding conditions. That’s why there are tree works that can be done only in the growing season. For example, it is necessary to trim trees in spring and summer to increase air circulation and provide more sunlight for flower buds, fruit, and berries. When trying to increase air circulation, move from the center to the outside parts of a tree. Don’t get too carried away, remove not more than one-quarter of branches not to cause poor growth of a tree.
  • Early spring-flowering shrubs and trees get some buds before winter comes to begin flowering on time. It is necessary to delay pruning till late spring when these shrub and tree species have finished flowering. In the winter months, you just remove all the flower buds.

Minuses

  • New growth of branches and leaves happens quickly.
  • You don’t see tree structure clearly as you do during winter pruning.
  • Pruning cuts may spread tree diseases since unlike cold-weather warmer weather brings conditions suitable for microorganisms such as destructive insects and bacteria.

video: Trimming Trees in Winter

 

When should you not trim trees?

There’s no concrete time of the year when it is forbidden to prune trees, however, there are phases of particular tree species which don’t assume pruning. For example, early spring-flowering shrubs shouldn’t be cut until they finished flowering.

In conclusion, we wish you good luck with trimming trees in winter if you will consider this way of cutting trees expedient and suitable for you.

Cut your own Christmas tree farms near me

Cut your own Christmas tree farms near me : Best Christmas Tree Farms

When the wintertime comes and it is really cold and dark outside, it is just necessary to cheer up a little bit and to bring a cozy Christmas atmosphere to the house. The fact you are here means you have googled something like “cut your own Christmas tree farms near me”, so you already know that one of the best ways of spending time in winter is to go to a Christmas tree farm.

Benefits of Visiting a Christmas Tree Farm

There are a lot of benefits which you will get if you come to a Christmas tree farm.

First of all, you will get a great Christmas tree, of course. If you are a decor lover, then we can not continue because to get one of the real Christmas trees as an addition to your decor is a good enough point to go to such a farm.

There are many kinds of Christmas trees (which may be hard to find in the supermarket) such as White Pine, Virginia Pine, Leyland Cypress, Norway Spruce, Scotch Pine… the list is long!

Secondly, you will attend a place filled with Christmas atmosphere, especially if you visit a cut your own Christmas tree farm decorated Christmas style and including different theme facilities.

Thirdly, you will have a great trip with your family, if they want to join you. It becomes more important in winter when there are fewer places to go for a walk. Trip to choose and cut Christmas trees for Christmas may become a nice family tradition.

Imagine how cool it will be to head to a road trip with your family to cut your own Christmas tree and to walk around a farm at Christmas season making memories.

Fourthly, since some of cut your own Christmas tree farms include great Christmas decorations and each of them has lots of Christmas trees as a minimum, visiting a farm is a cool opportunity to do photo ops both just for capturing the moment and for posting beautiful photos on your Facebook page or on Instagram.

Fifthly, you not only get more holiday fun, but you will also get a much more cool alive plant compared to a fake tree not paying a lot. Tree prices start from $30.00.

And did you know that 4th graders can get free Christmas trees?

So, let’s dive into the topic and figure out what Christmas tree farms are situated next to you!

Best Local Christmas Tree Farms {2021}

Christmas Tree Farms in West Michigan that Let You Cut Your Own Christmas Tree

Bivins Tree Farm

Cut your own Christmas tree farms near me

5085 13 mile road Rockford, MI 49341

U-cut and fresh Pre-cut Fraser Fir Christmas Trees.

U-cut every weekend from 10 am to dusk. Pre-cut any time.

Beautiful Porch Pots, fresh-made wreaths, and porch pot evergreen DIY kits are sold at Bivins Tree Farm.

Bosch’s U Cut Christmas Tree Farm At Country View Nurseries Inc.

Cut your own Christmas tree farms near me

White Pine, Colorado Blue Spruce, White Spruce, Norway Spruce, Blackhill Spruce, Fraser Fir, Concolor Fir, and Canaan Fir.

Choose & Cut Christmas Trees

The farm is owned by a family.

Church’s Tree Farm

Cut your own Christmas tree farms near me

182 136th St., Grant, MI – 231-834-7158

Fraiser Fir, Balsom Fir, & Canaan Fir

Fresh Fraiser Wreaths, Tree Stands and Tree Bags are available.

To get warm, drink a cup of hot cocoa or coffee served in the place.

Hart Tree Farm

Cut your own Christmas tree farms near me

8760 Young Ave NE Rockford MI 49341

Opens for the 2021 season on Saturday, November 20th.

Balsam Fir, Douglas Fir, Korean Fir, Blue Spruce, & Black Hill Spruce, Concolor Fir, Fraser Fir, Scotch Pine, White Pine.

Choose and cut, and fresh pre-cut trees, wreaths, greens, and garland. 

There’s a possibility to pet farm animals and to have free wagon rides.

Horrocks Christmas Trees

Cut your own Christmas tree farms near me

3355 Dildine Road, Ionia, MI 48846

Concolor first, Norway Spruce, White Pine, Hinoki Gold Cypress, Weeping White Pine.

Owned and operated by a family.

Choose & Cut and Pre-Cut trees.

There’s a Garden Center filled with many kinds of beautiful plants.

Janke Tree Farm

Cut your own Christmas tree farms near me

2676 111th Ave. Allegan, MI 49010

Balsam Fir, Canaan Fir, Concolor Fir (White Fir), Fraser Fir, Korean Fir, Norway Spruce (Red Fir), Black Hills Spruce, White Pine.

U-cut and pre-cut Christmas trees.

Enjoy hot chocolate, coffee, and sweets which are available for purchase.

Opening day 2021 is Black Friday – November 26.

Leber Tree Farm

Cut your own Christmas tree farms near me

2439 36th Street, Allegan MI 49010

Canaan Fir, Fraser Fir, Specialty Firs (Grand & Cork bark) – pre-cuts, Spruce (Blue & Engelmann) – limited pre-cuts.

Owned by a family.

There’s a small gift shop with a great selection of fresh-made wreaths and ornaments available for purchase.

Lenderink Tree Farm

Cut your own Christmas tree farms near me

401 House St NE, Belmont, MI 49306

White pine, Douglas fir, Blue Spruce, Balsam Fir, Grand fir, Black Hills Spruce, Canaan Fir.

Hot chocolate with marshmallows and coffee are free every day.

On weekends you can sit around a fire pit and have free wagon rides.

Wreaths are also available.

Christmas Tree Farms Near Chattanooga TN And The Surrounding Counties

Mcdowell’s Big Fork Nursery

Cut your own Christmas tree farms near me

4955 State Highway 27 Chattanooga, TN 37405

Cove Christmas Tree Farm

Cut your own Christmas tree farms near me

654 Kensington Rd Chickamauga, GA 30707

Family-owned farm.

As you can see from the picture, there’s a cool location for taking photos.

Raulston Acres Christmas Tree Farm

Cut your own Christmas tree farms near me

2572 GA-95, Rock Springs, GA

An average 6′ tree cost is about $48 (+tax).

Murray Cypress, Blue Ice Cypress, Carolina Sapphire, Virginia Pine, White Pine, pre-cut Fraser Fir, and Green Giant.

Here you can not only buy a pre-cut tree and cut Christmas trees, there’s an opportunity to donate a tree to troops at military bases across the U.S. and in Guam. The farm takes part in the Trees for Troops program founded by Christmas Spirit Foundation. To donate 1 tree costs $30.00.

Campbell’s Christmas Tree Farm

Cut your own Christmas tree farms near me

7503 Walnut Hills Drive, Harrison, TN

Family-owned farm.

Virginia Pine, White Pine, Murray Cypress, Frasier Fir Christmas Trees – precuts.

Wheeler’s Tree Farm

Cut your own Christmas tree farms near me

1144 Dogwood Valley Road, Tunnel Hill, GA

The farm is also involved in the Trees for Troops program mentioned in the description of Raulston Acres Christmas Tree Farm. Donate a tree to military bases if you wish.

Christmas Carroll Tree Farms

Cut your own Christmas tree farms near me
Cut your own Christmas tree farms near me

7206 Highway 95, LaFayette, Georgia 30728

Family-owned Christmas tree farm.

Leyland and Murray Cypress, Carolina Sapphire, Fraiser Fir

Santa Land Christmas Tree Farm

Cut your own Christmas tree farms near me

2574 Concord Road, LaFayette, GA

Family-owned Christmas tree farm.

Santa Land will open this year as usual on Thanksgiving Day, on the 25th of November.

Thornhill Farms Christmas Trees

Cut your own Christmas tree farms near me

15107 AL-71, Pisgah, AL

Leyland Cyprus, White Pines, Carolina Sapphire, Fraser Firs

You can have a cup of free hot cocoa or hot cider while you wait for your tree to get cut and wrapped.

Moreover, there’s a possibility to go on a wagon ride with your kids, to look at farm animals in the farm zoo, to meet Santa Claus (make sure that Santa visits the farm on the day of your arrival). However, maybe it’s not such a good idea to allow your kid to sit on Santa’s lap because of the coronavirus pandemic.

Little Mountain Tree Farm

3186 Griffith Road, Pikeville, TN

White Pine (Eastern White Pine), Norway Spruce, White Spruce, and Colorado Spruce

Young Road Christmas Tree Farm

Cut your own Christmas tree farms near me

139 Young Rd SW, Cartersville, GA 30120

Owned and operated by a family.

Eastern Red Cedar, Leyland Cypress, Virginia Pine, White Pine, and pre-cut Fraser firs

Open: From The Day After Thanksgiving

Young Road Christmas Tree Farm is the oldest operating Tree Farm in Bartow County.

Coker Tree Farm Georgia

Cut your own Christmas tree farms near me

2280 Macland Rd, Marietta, GA

Fraser Firs, Murray Cypress, and Carolina Sapphires.

Gates will open at 9 am on November 26th!

Camp’s Christmas Forest

415 Kile Rd, Sweetwater, TN

White Pine, Virginia Pine, Scotch Pine, Norway Spruce, Leyland Cypress, Carolina Sapphire Cypress, Murray Cypress.

Opening Day is Black Friday, the 26th of November.

Bluebird Christmas Tree Farm

Cut your own Christmas tree farms near me

985 Brushy Valley Rd, Heiskell, TN

Leyland cypress, Fraser fir, Virginia pine, Norway spruce, Concolor Fir, Nordmann Fir.

You can visit a gift shop and a pavilion to relax in front of a fire, to enjoy a cup of hot chocolate or hot cider, and buy a selection of excellent local jams, honey, and handcrafted items.

Opens for the 2021 season on November 18th. 

How to find a tree farm or lot using the NCTA Real Christmas Tree Locator

How To Pick a Suitable Place For a Christmas tree

If you put your tree at home, make sure that a source of heat is situated far enough from the place meant for the tree. Take into account the height of the tree and the height of your room. The distance between the tree top and the ceiling has to be not less than 1 foot. Most trees have the height between 6 and 9 feet.

If rooms differ by height, maybe you should consider the appropriateness of putting the tree in a higher room or just choose a smaller tree. In case you prefer the second option, don’t forget to measure the tree when you pick it.

How Do I Get Permission To Cut Down Trees?

Nowadays getting a tree cutting permit is possible and available for absolutely everyone!

When the New Year holidays come, you can get permission and cut down the Christmas tree which you like. Your own Christmas tree will bring joy to the whole family!

Obtaining Christmas tree-cutting permits on nearby public land can be done through the U.S. Forest Service (USFS) or the Bureau of Land Management (BLM).

How To Cut a Tree Correctly

After you choose a perfect tree for you, you need to cut it. But how to do it right so as not to bring inconvenience to Christmas tree farm owners or not to get injured?

First, cut a tree as close to the ground as possible. This way, you don’t leave a big stump on a territory of a farm and don’t make your tree too short. In case you think it will be hard for you to cut your own tree, either ask a worker to do it or get a pre-cut tree instead.

After you (or workers) cut your own Christmas tree, the workers shake the tree properly in order to remove all the ground and dirt that could appear at your home. Then your perfect Christmas tree is wrapped up in paper for a further successful trip home.

Transportation Of a Tree

Consider the most convenient way of transportation. Bring a truck if possible, as well as twine, rope, or straps for tying down your tree. The busiest time is when the gates open, so do expect a line for entrance due to limited parking! The line is usually better about 1-2 hours after gates open. Bathroom and portable potty available.

If you’re going to transport a tree with the help of the car, compare the size of the tree and the size of the car.

How To Install a Christmas Tree On a Tree Stand

A convenient way to install a Christmas tree is to buy a base on 1 of the local Christmas tree farms and to use it as a tree stand drilling holes in the tree preliminarily right on the Christmas tree farm. It is better to ask workers to help you drill these holes to be sure in the result.

How To Keep Christmas Trees Alive

Now when you know the answer to the question “What is the best cut your own Christmas tree farms near me?”, you need to learn how to treat a Christmas tree so it doesn’t die for some reason.

The first rule says that you should cut approximately 1 inch of the tree bottom with a handsaw. It is necessary to provide better absorption of water by Christmas trees. Otherwise, after some time since the cut a tree sap crusts over the tree bottom, so it becomes impossible to get nutrition for the tree and it dies. Take into account that even in case your trip is not really long, a tree sap forms anyway.

Fill the tree base with 1 and a half gallons of water and keep this amount constant. Such a big amount is needed to guarantee the presence of water in the base. If there’s not enough water, the tree begins to wither.

As for your safety, we advise you to apply only tested and reliable lights for Christmas trees decoration. But what to do with your real xmas tree after Christmas? We addressed this issue in our next article on the Christmas tree.

Overall

To sum up, one of the best activities to do during the holiday season is to head to a U Cut Christmas tree farm to cut your own tree (or to choose one from pre-cut Christmas trees).

We hope you managed to find Christmas tree farms which suit you.

Palm Tree Root System Removal

How to make palm tree root system removal properly

In our article, we will tell you about how to palm tree root system removal properly and after that, you will regarding this field.  Ok, let’s get started to view information about the root system.

Advantages of Removing a Palm Tree Stump

Palm tree stumps may stay around your property for a few good reasons like to serve exterior design in the yard.

  • Additional space for a garden: Palm tree stumps may take up an excellent space to plant new types of floras in your garden. These stumps may also give the tree a chance to regrow if you’re still interested in having a tree. By the way, you can find actual data in recent posts.
  • Spotless green lawn: Having a tree stump in the middle of the green lawn will not sit well with the neatness-conscious homeowners. Meanwhile, potassium nitrate will help you to use chemicals for removal.
  • A flat foundation for new buildings in your yard: Leveling the ground in the process of preparation for building new objects requires removing the stumps as well.
  • A clear field for kids to play around: If you have kids letting them run around a field with a tree stump is not a good idea. Any obstacle may cause accidents, so getting rid of the tree stump is like babyproofing your outdoor area at home.
  • Getting rid of potential animal and insect den: To get rid of the stump will be useful if it provides an ideal spot for these animals to stay on it. Also, note that drainage pipes will be harmed by the stump.
  • Generally improving the look of your garden: Overall, tree stumps don’t look great in a garden.

So, what about palm tree stumps?

Just use stump grinding and you will forget about problems.

Digging out the root ball

This will be hard work in the first instance, but it means the tree removal is complete in one step. You will need to dig around the stump – not close up, but 6-12 inches away – and then make a trench of about a foot deep. You need a lot of water to work with the roots. From here, you can start to dig underneath the stump and lever it out.

Well, the tree’s roots will be removed properly. This has the effect of chopping the roots which remain in the ground, ending their nutritional supply. Simply spread this method. Apart from it, buy stump grinder and apply for works.

How deep are palm tree roots?

Palm Tree Root System Removal

Palm tree roots grow about 36 inches deep within the topsoil area with a horizontal growth pattern. Take into account the holes. The roots remain narrow and maintain a shallow depth even as they elongate. So, adventitious roots are important to know.

If you’re growing a queen palm in your yard, you want to know how far the roots of a queen palm tree grow. While the tree can be big, the roots spread at a depth, not more than 24 inches. All the horizontal roots have access to water and nutrients. Just try to dig out the palm trees.

Removing Palm Tree Roots

If the roots of your palm trees are invasive and pose risk to other structures where the plant is growing, removal may be necessary. Don’t forget to spread this useful information. Uproot the stump and the root carefully in your yard.

The tree stump grinders are an important part of the main method, as you know.

To remove a palm tree root, dig around the trunk with a shovel to remove about 20-25 inches of soil surrounding the tree. This will give you access to the roots, so cut them off with an ax and then dig up any big roots that may remain. People need to remove a palm tree properly.

video:

The roots of the palm

The tree can grow back, apply a herbicide that’s strong enough to kill off a palm tree and prevent it from growing again. The holes should be defined to remove the stumps effectively.

Do palm tree roots grow back?

Not all varieties of palm trees can grow back after the trunk is cut. Those that grow back are clustering palms, which are known to sprout new stems from roots once the trunk is cut off. Just make roots exposed and forget about the problem.

For most of the other varieties of palm trees, cutting the trunk will mean the tree will die, so make sure you’re cutting down your palm trees for wood or other uses because they will not grow back. Search other trees in your yard.

The roots of the trees usually regenerate

It is why you can cut a certain amount of roots from the tree when transplanting and still be able to revive the plant. However, palm trees still should be treated carefully.

It is even possible to prune off roots that grow beyond the root ball and the plant will still survive and revive as new roots rejuvenate. This practice may, however, weaken the strength of the tree and make it susceptible to storm damage.

Your trunk and root ball will be dug out for short time.

Do Palm Trees Grow Back?

Some palm tree species grow roots after the trunk is cut, and others don’t. That’s why palm tree stump is an important part of this phenomenon. Most palm tree species can regenerate their roots as long as possible. Be careful about species.

You can cut a few of these roots during transplanting, and the palm tree will survive the transplant. Besides, a fibrous root system causes some troubles to a tree.

Roots growing too far from the root ball

It can also be pruned off without killing the palm tree. The tree will continue growing as new roots will grow. However, this practice may weaken the overall strength of the tree. And future planting can help you to decorate the yard.

How to Remove Palm Tree Roots

When it’s time to remove a palm tree, it is necessary to use a planned approach, which includes removing the palm tree roots. There are many options when looking to remove a palm tree stump or any tree stump for that matter. Removing the roots will ensure that any future growth is prevented.

1.     Cut the palm tree with a trimming saw and leave at least 2 feet of the tree trunk. So, palm trees will not last later.

2.     Dig 18-24 inches around the base of the palm tree trunk using a suitable tool, (a mattock or Pulaski would be good for this), and remove 20-25 inches of soil as you work the roots with the shovel. Note that the root initiation zone needs to be met.

3.     Continue working with the shovel around the root ball, prying it upward. And grown roots won’t happen. As you progress and cut off most of the roots, use the remaining part of the tree trunk as leverage for prying out the root ball. Don’t forget about the hole, indeed.

4.     Remove the root ball from the ground, cut off any large exposed roots, and fill the hole back with dirt. Your palm tree roots will be destroyed as you wanted them to.

Consider using herbicides

To kill the palm roots, apply glyphosate roundup herbicides that are sure to kill the palm roots and the tree. As for short palm tree, don’t worry, they cannot obstacle you.

Why Remove The Stump

There are many reasons why you should remove the stump:

  • You may be up for a penalty, so time may not be on your side when it comes to stump removals. Deal with your stump promptly. The attached roots require more attention.
  • You don’t want to be responsible for someone falling over the protruding stump in the ground. And many other trees also should be treated this way. You previously had a tree (so are not looking out for a stump), or insufficient lighting, causing someone to stumble.
  • Disease or pests can still live in a tree stump – after all, some like termites are particularly fond of wood, and although your tree isn’t there anymore, the wood is not dead yet. These can also migrate to other trees and plants, causing more damage. Well, lose soil and be careful about the tree.
  • It may interfere with your new landscaping plans. The hole will be closed according to your plans.

Palm tree removal

It will not shoot suckers. Once a palm tree is a stump, it will stay just like that. This makes tree removal much more simple. The stump grinder allows you to take all measures correctly.

Chemicals

To remove your palm tree stump, drill holes into the stump about 8 inches deep. Pour your chemical into the holes and top up with a small amount of water. Well, depth is an important feature in the case. Cover the palm tree stumps to keep dry everything outside and soil structure will not be harmed.

Over time, the chemical kills the roots, causing the tree stumps to become deadwood and easier to remove. That’s why stump removal chemicals are an effective action to remove the matter.

The most common chemical

One of the chemicals used for this purpose is potassium nitrate. Apart from it, tree stump should be put away in the right way. By the way, the palms are amazing trees, indeed. It would be advisable to leave usage of these to those trained in stump removal.

Palm Tree Root System Removal

Tips And Reminders For Palm Tree Root System Removal

Each stump removal method mentioned in this post comes with risks. Do stump grinding service in the proper way.

Here are some tips for getting rid of the unsightly stumps:

  • Heavy machinery is a pleasant method of removing stumps.
  • Check your city regulations and community guidelines before setting up your palm tree stump on fire. The root system will be destroyed forever.
  • It is convenient to use a shovel as leverage.
  • Treat while walking or working on covering the ground. That’s why pro tip improves the method.

Final Thoughts

Palm tree stump removal is one step in improving the landscape of your yard. And Epsom salts need to be removed as well. The root system of the palm tree may look intimidating, but with the right tools, you can easily remove the whole stump completely. As you know, a tall tree is difficult to treat.

We hope that this post gave you some ideas on how you can remove the stubborn stump on your property. Notice that roots grow horizontally.

We hope the article is interesting for you.

If you are interested in palm care, we encourage you to check out the research by the UCCE Expert in the Department of Agriculture and Natural Resources of the University of California.

So, palm trees are an interesting topic for discussing, indeed.